C-Tech生產的碳纖維三角帆桿幾乎適用于任何游艇，等級或桿端配件。

碳纖維三角帆桿通常比同等的鋁桿輕50%，剛度超過20%。C-Tech的芯軸包覆制造工藝使我們能夠添加局部加固，并定制平行或錐形層壓板，以滿足確切的要求。

標準桿的范圍是：我們最小的標準尺寸--內徑22毫米，長達4.2米（適用于12英尺以下的游艇）到我們最大的標準尺寸--內徑150毫米，錐形到9.4米（適用于95英尺以下的游艇）。

可提供更大的定制尺寸，以及凱夫拉耐磨條、騎師桿、須眉桿和臂桿以及桿套，方便運輸。

標準三角帆桿
C-Tech設計和制造的三角帆桿可以滿足您游艇的確切要求。碳纖維部分的重量和剛度都經過優化。一系列的端部配件和索具選項是可用的。桿子可以用自然的，清漆或油漆完成。

伸縮式三角帆桿
C-Tech制造的伸縮式三角帆桿可用于各種不同長度的三角帆和基諾帆。

英文介紹

C-Tech manufacture carbon fibre spinnaker poles to suit almost any yacht, class or pole end fittings.

Carbon fibre spinnaker poles are typically 50% lighter and over 20% stiffer than an equivalent aluminium pole. C-Tech's mandrel wrapped manufacturing process enables us to add localised reinforcement and customise a parallel or tapered laminate to suit the exact requirements.

Standard pole sections range between: our smallest standard size - 22mm ID, up to 4.2m (for a yacht up to 12ft) to our biggest standard size - 150mm ID, tapers to 9.4m (for a yacht up to 95ft).

Larger custom sizes are available as well as kevlar wear strips, jockey poles, whisker and jib poles and poles sleeved for easy shipping.

Standard Spinnaker Poles
C-Tech design and build spinnaker poles to suit the exact requirements for your yacht. The carbon fibre section is optimised for weight and stiffness. A range of end fittings are rigging options are available. Poles can be suplied with a natural, clearcoat or painted finish.

Telescopic Spinnaker Poles
C-Tech build telescopic spinnaker poles that can be used at a range of intermediate lengths to pole out a number of different jibs and genoas.